3M™ Particulate Filter 2135, P2/P3
Provides protection against: Particulates (P2/P3*).
*Higher P3 protection factors only achieved with a 3M™ Full Face Respirator, otherwise P2 protection level when worn on a 3M™ Half Face Respirator.
- Made from 3M™ high performance filter media for effective filtration efficiency
- Lightweight and provides low breathing resistance
- 3M™ Bayonet Connection System ensures precise and secure locking
- Low profile and well balanced twin filter design
- Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
Protection Factors
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
- With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
- With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES
Common Applications/Hazards: For protection against toxic particles such as asbestos (refer to local government guidelines). Also for mould remediation and Beryllium
Specifications
Cartridge or Filter Rating: P2/P3*
Filter Type: Particulate Filters
Product Series: 2000 Series
Compliance: Approved to AS/NZS 1716:2012