3M™ Particulate Filter 2128, GP2, with Nuisance Level Organic Vapour/Acid Gas Relief
Provides protection against: Particulates (P2), Ozone and Nuisance Level* Acid Gas and Organic Vapours with Low Vapour Pressure.
- Made from 3M™ high performance filter media for effective filtration efficiency
- Lightweight and provides low breathing resistance
- Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
Protection Factors
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
- With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
- With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES
- Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES
- Ozone up to 10 x WES
- Offers relief from acid gases and organic vapours at levels below the WES
*Nuisance Levels are those levels below the Workplace Exposure Standard (WES).
Common Applications/Hazards: For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure <1.3 Pa @ 25°C
Specifications:
Cartridge or Filter Rating: GP2
Cartridge or Filter Type: GP2
Filter Type: Gas, Vapour & Particulate Filters
Nuisance Odor Relief: Organic Vapors and Acid Gases
Product Series: 2000 Series
Compliance: Approved to AS/NZS 1716:2012